# packages

pkgId: 0b242ff12ffbe6ada49f6e0c1607e0f52e11d5c8504f58252207f60d5f652d32
name: R-FactoMineR
arch: noarch
version: 1.42
epoch: 0
release: 1.el8.lc
summary: Multivariate Exploratory Data Analysis and Data Mining
url: http://cran.r-project.org/web/packages/car/index.html
rpm_license: GPLv2+
rpm_group: Applications/Engineering
rpm_buildhost: rhel8.lite.msu.edu
rpm_sourcerpm: R-FactoMineR-1.42-1.el8.lc.src.rpm
location_href: R-FactoMineR-1.42-1.el8.lc.noarch.rpm
checksum_type: sha256
description:
  R package:
  Exploratory data analysis methods to summarize, visualize and describe datasets. The main principal component methods are available, those with the largest potential in terms of applications: principal component analysis (PCA) when variables are quantitative, correspondence analysis (CA) and multiple correspondence analysis (MCA) when variables are categorical, Multiple Factor Analysis when variables are structured in groups, etc. and hierarchical cluster analysis. F. Husson, S. Le and J. Pages (2017).


pkgId: 2b58d02f86f9bf42e2da6a40c652c588f9d6fadd5033866760d49ab48f08ad9d
name: R-Formula
arch: noarch
version: 1.2.3
epoch: 0
release: 1.el8.lc
url: http://cran.r-project.org/web/packages/Formula/index.html
rpm_license: GPLv2+
rpm_group: Applications/Engineering
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: R-Formula-1.2.3-1.el8.lc.src.rpm
location_href: R-Formula-1.2.3-1.el8.lc.noarch.rpm
checksum_type: sha256
summary:
  Infrastructure for extended formulas with multiple parts on the right-hand side and/or multiple responses on the left-hand side

description:
  R package:
  Infrastructure for extended formulas with multiple parts on the right-hand side and/or multiple responses on the left-hand side


pkgId: 64d93020ab0608047a182823391fda785384b34f19f2beff08083acef314c485
name: R-RColorBrewer
arch: noarch
version: 1.1.2
epoch: 0
release: 1.el8.lc
summary: ColorBrewer Palettes
url: https://CRAN.R-project.org/package=RColorBrewer
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: R-RColorBrewer-1.1.2-1.el8.lc.src.rpm
location_href: R-RColorBrewer-1.1.2-1.el8.lc.noarch.rpm
checksum_type: sha256
description:
  Provides color schemes for maps (and other graphics) designed by Cynthia
  Brewer as described at http://colorbrewer2.org


pkgId: 95ab5aeaffc9edc67b8ba5fd052c44130660d108031b44d6d385d5d038cc9d97
name: R-alr3
arch: noarch
version: 2.0.8
epoch: 0
release: 1.el8.lc
summary: Methods and data to accompany Applied Linear Regression 3rd edition
url: http://cran.r-project.org/web/packages/alr3/index.html
rpm_license: GPLv2+
rpm_group: Applications/Engineering
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: R-alr3-2.0.8-1.el8.lc.src.rpm
location_href: R-alr3-2.0.8-1.el8.lc.noarch.rpm
checksum_type: sha256
description:
  R package:
  This library is a companion to the textbook S. Weisberg (2005), "Applied Linear Regression," 3rd edition, Wiley.
  It includes all the data sets discussed in the book (except one), and several few functions that are tailored to
  the methods discussed in the book.


pkgId: c0676cd10e1cdd066cdb4d10f673802d52130a9c80327050af1b7e43c9ccd84e
name: R-car
arch: noarch
version: 2.0.22
epoch: 0
release: 1.el8.lc
summary: Companion to Applied Regression package for R
url: http://cran.r-project.org/web/packages/car/index.html
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: R-car-2.0.22-1.el8.lc.src.rpm
location_href: R-car-2.0.22-1.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This package accompanies J. Fox, An R and S-PLUS Companion to Applied
  Regression, Sage, 2002. The package contains mostly functions for applied
  regression, linear models, and generalized linear models, with an emphasis on
  regression diagnostics, particularly graphical diagnostic methods.  There are
  also some utility functions. With some exceptions, it does not duplicate
  capabilities in the basic distribution of R, nor in widely used packages.
  Where relevant, the functions in car are consistent with na.action = na.omit
  or na.exclude.


pkgId: f39976b4e6f98e818600960452bef03a249f0b15762a1c223325765dd2ceeaaa
name: R-ellipse
arch: noarch
version: 0.4.5
epoch: 0
release: 1.el8.lc
summary: Functions for Drawing Ellipses and Ellipse-Like Confidence Regions
url: http://cran.r-project.org/web/packages/ellipse/index.html
rpm_license: GPLv2+
rpm_group: Applications/Engineering
rpm_buildhost: rhel8.lite.msu.edu
rpm_sourcerpm: R-ellipse-0.4.5-1.el8.lc.src.rpm
location_href: R-ellipse-0.4.5-1.el8.lc.noarch.rpm
checksum_type: sha256
description:
  R package:
  Contains various routines for drawing ellipses and ellipse-like confidence regions, implementing the plots described in Murdoch and Chow (1996). There are also routines implementing the profile plots described in Bates and Watts (1988)


pkgId: 16f8e944fc398deb0658e679607c0b0beec6a9ca294efc788114fa17b68dd7d0
name: R-mdatools
arch: noarch
version: 0.14.1
epoch: 0
release: 1.el8.lc
url: http://cran.r-project.org/web/packages/mdatools/index.html
rpm_license: GPLv2+
rpm_group: Applications/Engineering
rpm_buildhost: rhel8.lite.msu.edu
rpm_sourcerpm: R-mdatools-0.14.1-1.el8.lc.src.rpm
location_href: R-mdatools-0.14.1-1.el8.lc.noarch.rpm
checksum_type: sha256
summary:
  Projection based methods for preprocessing, exploring and analysis of multivariate data used in chemometrics

description:
  R package:
  R package for preprocessing, exploring and analysis of multivariate data. The package provides methods mostly common for Chemometrics.


pkgId: 778261629b4fd83a4f3bdd2d8cf6b290949875fbb0da5e992bead8a0b65bc844
name: R-phpSerialize
arch: noarch
version: 0.8.1
epoch: 0
release: 1.el8.lc
summary: Serializes R objects for import by PHP into an associative array.
url: http://cran.r-project.org/web/packages/phpSerialize/index.html
rpm_license: GPLv2+
rpm_group: Applications/Engineering
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: R-phpSerialize-0.8.1-1.el8.lc.src.rpm
location_href: R-phpSerialize-0.8.1-1.el8.lc.noarch.rpm
checksum_type: sha256
description:
  R package:
  Serializes R objects for import by PHP into an associative array. Can be used to build interactive web pages with R.


pkgId: ba44a77aeebc4308ddf9bd7b0a04ab64285f5b7756135812d94702ac80b45259
name: R-qAnalyst
arch: noarch
version: 0.6.4
epoch: 0
release: 1.el8.lc
summary: Control Charts, Capability and Distribution Identification
url: https://cran.r-project.org/src/contrib/Archive/qAnalyst/
rpm_license: GPLv2+
rpm_group: Applications/Engineering
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: R-qAnalyst-0.6.4-1.el8.lc.src.rpm
location_href: R-qAnalyst-0.6.4-1.el8.lc.noarch.rpm
checksum_type: sha256
description:
  R package:
  Control charts for variables and attributes according to Douglas C. Montgomery Introduction to Statistical Quality Control book,
  Capability analysis for normal and non - normal distributions and Distributions Identification


pkgId: 690090f069ef1c8ff2ec9ee873a77a27b6f1366d627ce5cf4c26b7221fee5891
name: perl-CAM-PDF
arch: noarch
version: 1.60
epoch: 0
release: 1.0.el8.lc
summary: CAM-PDF - Perl module
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Chris Dolan <cdolan@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-CAM-PDF-1.60-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-CAM-PDF-1.60-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This package reads and writes any document that conforms to the PDF specification provided by Adobe.

  The file format through PDF 1.5 is well-supported, with the exception of the "linearized" or "optimized" output format,
  which this module can read but not write.

  Many specific aspects of the document model are not manipulable with this package (like fonts),
  but if the input document is correctly written, then this module will preserve the model integrity.


pkgId: 9f7c732d703498e34608b31f19639d1e65b932037601b0f7429edd487ac9874c
name: perl-Captcha-reCAPTCHA
arch: noarch
version: 0.99
epoch: 0
release: 1.0.el8.lc
summary: Captcha-reCAPTCHA - A Perl implementation of the reCAPTCHA API
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Andy Armstrong <andy@hexten.net>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Captcha-reCAPTCHA-0.99-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Captcha-reCAPTCHA-0.99-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  reCAPTCHA version 1 is a hybrid mechanical turk and captcha that allows visitors
  who complete the captcha to assist in the digitization of books.

  From http://recaptcha.net/learnmore.html:

      reCAPTCHA improves the process of digitizing books by sending words that
      cannot be read by computers to the Web in the form of CAPTCHAs for
      humans to decipher. More specifically, each word that cannot be read
      correctly by OCR is placed on an image and used as a CAPTCHA. This is
      possible because most OCR programs alert you when a word cannot be read
      correctly.

  version 1 of Perl implementation is modelled on the PHP interface that can be
  found here:

  http://recaptcha.net/plugins/php/

  To use reCAPTCHA you need to register your site here:

  https://www.google.com/recaptcha/admin/create


  Version 2 is a new and eaasy to solve captcha that is
  "easy for humans to solve, but hard for 'bots' and other malicious software"


pkgId: 8deffb67876935a39922b732d6630387686cb215c8cd61529b22af9818755c01
name: perl-Crypt-LE
arch: noarch
version: 0.34
epoch: 0
release: 1.0.el8.lc
summary: Crypt-LE - Let's Encrypt API interfacing module and client.
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Alexander Yezhov C <leader@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Crypt-LE-0.34-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Crypt-LE-0.34-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  Crypt::LE provides the functionality necessary to use Let's Encrypt API and generate free SSL certificates for your domains. It can also
  be used to generate RSA keys and Certificate Signing Requests or to revoke previously issued certificates. Crypt::LE is shipped with a
  self-sufficient client for obtaining SSL certificates - le.pl.

  Provided client supports 'http' and 'dns' domain verification out of the box.

  Crypt::LE can be easily extended with custom plugins to handle Let's Encrypt challenges. See the Crypt::LE::Challenge::Simple manpage module
  for an example of a challenge-handling plugin.

  Basic usage:

  le.pl --key account.key --csr domain.csr --csr-key domain.key --crt domain.crt --domains "www.domain.ext,domain.ext" --generate-missing

  That will generate an account key and a CSR (plus key) if they are missing. If any of those files exist, they will just be loaded, so it is safe to re-run
  the client. Run le.pl without any parameters or with `--help' to see more details and usage examples.

  In addition to challenge-handling plugins, the client also supports completion-handling plugins, such as the Crypt::LE::Complete::Simple manpage. You can easily
  handle challenges and trigger specific actions when your certificate gets issued by using those modules as templates, without modifying the client code.
  You can also pass custom parameters to your modules from le.pl command line:

  le.pl ... --handle-with Crypt::LE::Challenge::Simple --handle-params '{"key1": 1, "key2": "one"}'

  le.pl ... --complete-with Crypt::LE::Complete::Simple --complete-params '{"key1": 1, "key2": "one"}'

  The parameters don't have to be put directly in the command line, you could also give a name of a file containing valid JSON to read them from.

  le.pl ... --complete-params complete.json

  Crypt::LE::Challenge:: and Crypt::LE::Complete:: namespaces are suggested for new plugins.


pkgId: 6fb6f88915fa7038c17a6f9d5af8e2c6effbcb52abdba5eb1792b0332292ea6b
name: perl-Crypt-PKCS10
arch: noarch
version: 2.001
epoch: 0
release: 1.0.el8.lc
summary: Crypt-PKCS10 - Perl module
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Scott T. Hardin <mrscotty@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Crypt-PKCS10-2.001-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Crypt-PKCS10-2.001-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This module parses PKCS #10 certificate requests (CSRs) and provides accessor methods to extract the data in usable form.


pkgId: afb2343369b57a4aa46b8b57b6b02913b98bda51fc5ac7cc4ad80a97e768dfeb
name: perl-Crypt-X509-CRL_loncapa
arch: noarch
version: 0.1
epoch: 0
release: 1.0.el8.lc
summary: Crypt-X509-CRL - Parses an X.509 certificate revocation list
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Duncan Segrest <gigageek@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Crypt-X509-CRL_loncapa-0.1-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Crypt-X509-CRL_loncapa-0.1-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  Crypt::X509::CRL parses X.509 certificate revocation lists. Methods are
  provided for accessing most CRL elements.

  It is based on the generic ASN.1 module by Graham Barr, on the
  x509decode example by Norbert Klasen and contributions on the
  perl-ldap-dev-Mailinglist by Chriss Ridd. It is also based upon the
  works of Mike Jackson and Alexander Jung perl module Crypt::X509.

  The following RFC 3280 Extensions are available (noted are the ones I
  have implemented).

  	Authority Key Identifier (implemented)
  	CRL Number (implemented)
  	Issuing Distribution Point (implemented)
  	Issuer Alternative Name
  	Delta CRL Indicator
  	Freshest CRL (a.k.a. Delta CRL Distribution Point)

  The following RFC 3280 CRL Entry Extensions are available (noted are the
  ones I have implemented).

  	Reason Code (implemented)
  	Hold Instruction Code (implemented)
  	Invalidity Date (implemented)
  	Certificate Issuer

  NOTE: The use of 'utcTime' in determining the revocation date of a given
  certificate is based on RFC 3280 for dates through the year 2049.  Starting
  with dates in 2050 and beyond the RFC calls for revocation dates to be
  listed as 'generalTime'.







  Version used by LON-CAPA includes patch to the %oid2enchash
  to include items for RSA:SHA256, RSA:SHA384, RSA:SHA512 and
  RSA:SHA224.


pkgId: e37f66ae59a91f0b3b0b1904b5c9d46cf086cee22c984bba521f2e3d1b98a6b6
name: perl-Data-Paginator
arch: noarch
version: 0.08
epoch: 0
release: 1.0.el8.lc
summary: Data-Paginator - Pagination with Moose
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Cory G Watson <gphat@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Data-Paginator-0.08-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Data-Paginator-0.08-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This is yet another pagination module.
  It only exists because none of the other pager modules are written using Moose.
  Sometimes there is a Moose feature – MooseX::Storage, in my case – that you need.
  It's a pain when you can't use it with an existing module.
  This module aims to be completely compatible with the venerable Data::Page.
  In fact, it's a pretty blatant copy of Data::Page, lifting code from some of it's methods.


pkgId: a04ec003239d7b051fd64d947ab6c07f55f6b0259045eb3f2141341215063eeb
name: perl-File-MMagic
arch: noarch
version: 1.30
epoch: 0
release: 1.0.el8.lc
summary: File-MMagic - Guess file type from contents
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: NOKUBI Takatsugu <knok@daionet.gr.jp>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-File-MMagic-1.30-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-File-MMagic-1.30-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  checktype_filename(), checktype_filehandle() and checktype_contents
  returns string contains file type with MIME mediatype format.


pkgId: 41b0762151f06b07a8586e7997e100a03110d57fe2e4818c625013e1ff553a94
name: perl-GD-Graph3d
arch: noarch
version: 0.63
epoch: 0
release: 1.0.el8.lc
summary: GD-Graph3d - Creates 3D charts with GD::Graph and GD.
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Jeremy Wadsack <dgsupport@wadsack-allen.com>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-GD-Graph3d-0.63-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-GD-Graph3d-0.63-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This is the GD::Graph3d extensions module. It provides 3D graphs for the
  GD::Graph module by Martien Verbruggen, which in turn generates graph
  using Lincoln Stein's GD.pm.

  You use these modules just as you would any of the GD::Graph modules, except
  that they generate 3d-looking graphs. Each graph type is described below
  with only the options that are unique to the 3d version. The modules are
  based on their 2d versions (e.g. GD::Graph::bars3d works like
  GD::Graph::bars), and support all the options in those. Make sure to read
  the documentation on GD::Graph.

  =over 4

  =item GD::Graph::pie3d

  This is merely a wrapper around GD::Graph::pie for consistency. It also
  sets 3d pie mode by default (which GD::Graph does as of version 1.22).
  All options are exactly as in GD::Graph::pie.

  =item GD::Graph::bars3d

  This works like GD::Graph::bars, but draws 3d bars. The following settings
  are new or changed in GD::Graph::bars3d.

  =over 4

  =item bar_depth

  Sets the z-direction depth of the bars. This defaults to 10. If you have a
  large number of bars or a small chart width, you may want to change this.
  A visually good value for this is approximately
  width_of_chart / number_of_bars.

  =item overwrite

  In GD::Graph::bars, multiple series of bars are normally drawn side-by-side.
  You can set overwrite to 1 to tell it to draw each series behind the
  previous one. By setting overwrite to 2 you can have them drawn on top of
  each other, that is the series are stacked.

  =item shading

  By default this is set to '1' and will shade and highlight the bars (and axes).
  The light source is at top-left-center which scan well for most computer
  users. You can disable the shading of bars and axes by specifying a false
  value for this option.

  =back

  =item GD::Graph::lines3d

  This works like GD::Graph::lines, but draws 3d line. The following settings
  are new or changed in GD::Graph::line3d.

  =over 4

  =item line_depth

  Sets the z-direction depth of the lines. This defaults to 10. If you have a
  large number of bars or a small chart width, you may want to change this.
  A visually good value for this is approximately
  width_of_chart / number_of_bars.

  =item shading

  By default this is set to '1' and will shade and highlight the line (and axes).
  The light source is at top-left-center which scan well for most computer
  users. You can disable the shading of lines and axes by specifiying a false
  value for this option.

  =back

  =back


pkgId: a284468eec4896a969711943c204c8c62bf4b5d55ebe846b599d4938c095289c
name: perl-HTML-Tiny
arch: noarch
version: 1.05
epoch: 0
release: 1.0.el8.lc
summary: HTML-Tiny - Lightweight, dependency free HTML/XML generation
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Andy Armstrong <andy@hexten.net>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-HTML-Tiny-1.05-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-HTML-Tiny-1.05-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  `HTML::Tiny' is a simple, dependency free module for generating
  HTML (and XML). It concentrates on generating syntactically correct
  XHTML using a simple Perl notation.


pkgId: bf83b04f2fdbeebd8b9f369726066d3e502e4864060f205833caca3f7064b72b
name: perl-Math-Calculus-Expression_loncapa
arch: noarch
version: 0.2.2
epoch: 0
release: 1.0.el8.lc
summary: Math-Calculus-Expression - Algebraic Calculus Tools Expression Class
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Jonathan Worthington <jonathan@jwcs.net>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Math-Calculus-Expression_loncapa-0.2.2-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Math-Calculus-Expression_loncapa-0.2.2-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This module can take an algebraic expression, parse it into a tree structure, simplify
  the tree, substitute variables and named constants for other variables or constants
  (which may be numeric), numerically evaluate the tree and turn the tree back into an
  output of the same form as the input.

  It supports a wide range of expressions including the +, -, *, / and ^ (raise to
  power) operators, bracketed expressions to enable correct precedence and the functions
  ln, exp, sin, cos, tan, sec, cosec, cot, sinh, cosh, tanh, sech, cosech, coth, asin,
  acos, atan, asinh, acosh and atanh.

  Modifed from standard Math-Calculus-Expression-0.2.2, for use in LON-CAPA, by the
  addition of a math_calculus_expression() routine, which can be used with Safe::Hole
  to create a Math::Calculus::Expression object which can use all object methods inside
  the a perl Safe space container.

  sub math_calc_expression {
      return Math::Calculus::Expression->new(shift);
  }


pkgId: 89ed4aee529479c7875799d4b28a505e4bdb663d4bb418fd81e2fb73f8388dbe
name: perl-Math-Round
arch: noarch
version: 0.07
epoch: 0
release: 1.0.el8.lc
summary: Math-Round - Perl extension for rounding numbers
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Geoffrey Rommel <grommel@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Math-Round-0.07-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Math-Round-0.07-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  Math::Round supplies functions that will round numbers in different
  ways.  The functions round and nearest are exported by
  default; others are available.


pkgId: d0f33e88735348ec1644beb045aeee3e1a836998e575ce75c93816fe434a5f14
name: perl-Net-PH
arch: noarch
version: 2.21
epoch: 0
release: 1.0.el8.lc
summary: Net-PH - CCSO Nameserver Client class
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Graham Barr <gbarr@pobox.com>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Net-PH-2.21-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Net-PH-2.21-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  `Net::PH' is a class implementing a simple Nameserver/PH client in Perl
  as described in the CCSO Nameserver -- Server-Client Protocol. Like other
  modules in the Net:: family the `Net::PH' object inherits methods from
  `Net::Cmd'.


pkgId: 7ec240707431129cbe7318666314014791a0ebdd86d94214fa262f650ee597b1
name: perl-Number-FormatEng
arch: noarch
version: 0.03
epoch: 0
release: 1.0.el8.lc
summary: Number-FormatEng - Format a number using engineering notation
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Gene Sullivan <gsullivan@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Number-FormatEng-0.03-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Number-FormatEng-0.03-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  Format a number for printing using engineering notation.
  Engineering notation is similar to scientific notation except that
  the power of ten must be a multiple of three.
  Alternately, the number can be formatted using an International
  System of Units (SI) prefix representing a factor of a thousand.


pkgId: de60814bd9eef5fe2bf5588ae837569378691bd8ac348260ce9014182aae18b9
name: perl-PostScript-Simple
arch: noarch
version: 0.09
epoch: 0
release: 1.0.el8.lc
summary: PostScript-Simple - Produce PostScript files from Perl
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Matthew Newton <mcnewton@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-PostScript-Simple-0.09-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-PostScript-Simple-0.09-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  PostScript::Simple allows you to have a simple method of writing PostScript
  files from Perl. It has graphics primitives that allow lines, curves, circles,
  polygons and boxes to be drawn. Text can be added to the page using standard
  PostScript fonts.

  The images can be single page EPS files, or multipage PostScript files. The
  image size can be set by using a recognised paper size ("`A4'", for example) or
  by giving dimensions. The units used can be specified ("`mm'" or "`in'", etc)
  and are the same as those used in TeX. The default unit is a bp, or a PostScript
  point, unlike TeX.


pkgId: 934d210e4c7f4cc0fc3d97f6c9c792d1ac029aab2c0c4f4a7899e8160d071f85
name: perl-Short-URL
arch: noarch
version: 0.015
epoch: 0
release: 1.0.el8.lc
summary: Short-URL - Perl module
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Adam Hopkins <srchulo@cpan.org>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Short-URL-0.015-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Short-URL-0.015-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This module can be used to help generate short, unique character string urls.
  It uses Bijection to create a one-to-one mapping from integers to strings over your alphabet,
  and from strings over your alphabet back to the original integer.


pkgId: 4d43085f4b01c570093e9f00b0fda5ea25a29df62e835ba99bee3aef49abefd8
name: perl-Text-PDF
arch: noarch
version: 0.31
epoch: 0
release: 1.0.el8.lc
summary: Text-PDF - PDF Manipulation and generation
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: martin_hosken@sil.org
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Text-PDF-0.31-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Text-PDF-0.31-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This module allows interaction with existing PDF files directly. It includes
  various tools including:

    pdfbklt - make booklets out of existing PDF files
    pdfrevert - remove edits from a PDF file
    pdfstamp - stamp text on each page of a PDF file

  various example programs are also included


pkgId: bb9c2c0390b784ead39c849625bea4906d64f24b5ee121b6687eff8bea9d1a42
name: perl-Text-Query
arch: noarch
version: 0.09
epoch: 0
release: 1.0.el8.lc
summary: Text-Query - Query processing framework
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Eric Bohlman <ebohlman@netcom.com>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Text-Query-0.09-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Text-Query-0.09-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This module provides an object that matches a data source
  against a query expression.

  Query expressions are compiled into an internal form when a new object is created
  or the `prepare' method is
  called; they are not recompiled on each match.

  The class provided by this module uses four packages to process the query.
  The query parser parses the question and calls a query expression
  builder (internal form of the question). The optimizer is then called
  to reduce the complexity of the expression. The solver applies the expression
  on a data source.


pkgId: c20b9e4acd5c8dd78579f2ad4a43c0c795939beebb16a29bc361973b5feef2b6
name: perl-Text-Tabs+Wrap
arch: noarch
version: 2023.0511
epoch: 0
release: 1.0.el8.lc
summary: Text-Tabs+Wrap - Expand tabs and do simple line wrapping
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: David Muir Sharnoff <muir@idiom.org>
rpm_group: Applications/CPAN
rpm_buildhost: rhel8.lite.msu.edu
rpm_sourcerpm: perl-Text-Tabs+Wrap-2023.0511-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Text-Tabs+Wrap-2023.0511-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  Text::Wrap::wrap() is a very simple paragraph formatter.  It formats a
  single paragraph at a time by breaking lines at word boundaries.
  Indentation is controlled for the first line ($initial_tab) and
  all subsequent lines ($subsequent_tab) independently.  Please note:
  $initial_tab and $subsequent_tab are the literal strings that will
  be used: it is unlikely you would want to pass in a number.

  Text::Wrap::fill() is a simple multi-paragraph formatter.  It formats
  each paragraph separately and then joins them together when it's done.  It
  will destroy any whitespace in the original text.  It breaks text into
  paragraphs by looking for whitespace after a newline.  In other respects,
  it acts like wrap().

  wrap() compresses trailing whitespace into one newline, and fill()
  deletes all trailing whitespace.

  Both wrap() and fill() return a single string.

  Unlike the old Unix fmt(1) utility, this module correctly accounts for
  any Unicode combining characters (such as diacriticals) that may occur
  in each line for both expansion and unexpansion.  These are overstrike
  characters that do not increment the logical position.  Make sure
  you have the appropriate Unicode settings enabled.


pkgId: 24c20070d447c5ef7826da55510b4fb6e710bafbd48babc9550ed960c18916d5
name: perl-Tie-IxHash-Easy
arch: noarch
version: 0.01
epoch: 0
release: 1.0.el8.lc
summary: Tie-IxHash-Easy - Auto-tie()s internal hashes in a tied hash
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: japhy <japhy@>
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Tie-IxHash-Easy-0.01-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Tie-IxHash-Easy-0.01-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This module automatically ties any hash reference in the tied hash to
  the same class, making all of them behave like Tie::IxHash hashes.


pkgId: eab0b0c814d9e718869fac3c6b86c52fbe6d6607477f9bb2eb414b55bc8e1756
name: perl-Tree
arch: noarch
version: 1.14
epoch: 0
release: 1.0.el8.lc
summary: Tree - Persist multiple trees in a single db table, preserving child order
url: http://www.cpan.org
rpm_license: Artistic
rpm_vendor: Rob Kinyin (rkinyon@cpan.org)
rpm_group: Applications/CPAN
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: perl-Tree-1.14-1.0.el8.lc.src.rpm
rpm_packager: Stuart Raeburn <raeburn@loncapa.org>
location_href: perl-Tree-1.14-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This is meant to be a full-featured N-ary tree representation with
  configurable error-handling and a simple events system that allows for
  transparent persistence to a variety of datastores. It is derived from
  the Tree::Simple manpage, but has a simpler interface and much, much more.


pkgId: 8c1daa3660c6569760ae56e5501f4d2fc2cdcbdf5f9b51bfa1295ac8a357da0d
name: psutils
arch: noarch
version: 2.07
epoch: 0
release: 1.el8
summary: PostScript utilities
url: https://github.com/rrthomas/psutils
rpm_license: GPLv3+ and psutils
rpm_group: Unspecified
rpm_buildhost: rhel8.lite.msu.edu
rpm_sourcerpm: psutils-2.07-1.el8.src.rpm
location_href: psutils-2.07-1.el8.noarch.rpm
checksum_type: sha256
description:
  Utilities for manipulating PostScript documents.
  Page selection and rearrangement are supported, including arrangement into
  signatures for booklet printing, and page merging for n-up printing.


pkgId: 5461b93740a781a71d1f8a9c030d81b0d7b58c385c9bb9da9968f2cfa908d90b
name: texlive-acrotex
arch: noarch
version: 6.05
epoch: 0
release: 1.0.el8.lc
summary: The AcroTeX eDucation Bundle used for PDF forms
url: http://www.ctan.org/tex-archive/macros/latex/contrib/acrotex/
rpm_license: GPL
rpm_vendor: D. P. Story <dpstory@acrotex.net>
rpm_group: Applications/Publishing
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: texlive-acrotex-6.05-1.0.el8.lc.src.rpm
rpm_packager: LON-CAPA <raeburn@lon-capa.org>
location_href: texlive-acrotex-6.05-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  Acrotex package to support PDF forms which students can use to complete LON-CAPA homework problems offline


pkgId: 30bc670b47d23f6a6a0e0666782021066f73fa17c19d114607bb5d69ab24c6a1
name: texlive-actuarialangle
arch: noarch
version: 0
epoch: 0
release: 1.0.el8.lc
summary: Actuarial angle symbol in LaTeX
url: https://www.ctan.org/pkg/actuarialangle
rpm_license: LaTeX Project Public License
rpm_vendor: Vincent Goulet
rpm_group: Applications/Publishing
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: texlive-actuarialangle-0-1.0.el8.lc.src.rpm
rpm_packager: LON-CAPA <raeburn@lon-capa.org>
location_href: texlive-actuarialangle-0-1.0.el8.lc.noarch.rpm
checksum_type: sha256
description:
  This package provides the actuarialangle symbol in LaTeX documents.
  The simplest use of this package is to add
      \usepackage{actuarialangle}
  to your header


pkgId: d67c855ea490e3dadfef313340caf31ae50d6c0b9a6c5ac18e6010754477f91a
name: texlive-dejavu
arch: noarch
version: svn31771.2.34
epoch: 8
release: 25.el8
summary: LaTeX support for the DejaVu fonts
url: http://tug.org/texlive/
rpm_license: LPPL
rpm_group: Unspecified
rpm_buildhost: centos8.loncapa.org
rpm_sourcerpm: texlive-2018-25.el8.src.rpm
location_href: texlive-dejavu-svn31771.2.34-25.el8.noarch.rpm
checksum_type: sha256
description:
  The package contains LaTeX support for the DejaVu fonts, which
  are derived from the Vera fonts but contain more characters and
  styles. The fonts are included in the original TrueType format,
  and in converted Type 1 format. The (currently) supported
  encodings are: OT1, T1, IL2, TS1, T2*, X2, QX, and LGR. The
  package doesn't (currently) support mathematics. More encodings
  and/or features are expected.


